Filter
Top Products
20
7 Repeat step 6, and then enter all
characters of the label name.
8 Press down the jog dial for 2 seconds or
more.
The disc is labeled.
On the remote control
1 Insert a disc.
See step 1 of “On the recorder” to check
the varieties of name you can label
(page 19).
2 Press DISPLAY for 2 seconds or more.
3 Turn the control repeatedly until
“EDIT” flashes in the display, and then
press x to enter.
4 Turn the control repeatedly until the
following item appears in the display,
and then press x to enter.
When labeling a track:
“:Name”
When labeling a group:
“GP : Name”
When labeling a disc:
“:Name”
5 Turn the control repeatedly to select a
letter and press x to enter.
The selected letter stops flashing and the
cursor moves to the next input position.
6 Repeat step 5 and enter all characters of
the label name.
7 Keep pressing x for 2 seconds or
longer.
The track or disc is labeled.
To cancel labeling
Press CANCEL on the recorder.
Press DISPLAY for 2 seconds or more on the
remote control.
Notes
• When the recording is stopped while labeling
a track, a group, or a disc during recording, or
when the playback moves on to the next track
while labeling a track during playback, the
input at that point is entered automatically.
• “LP:” has automatically been added at the
beginning of the track names for tracks
recorded in MDLP mode.
• You cannot label or relabel the premastered
disc.
To display “:”, “–”
and “/” repeatedly at
the input position in
the letter input area.
Press T MARK.
To cancel labeling in
the letter input area.
Press CANCEL.
1)
Functions of the buttons and control may differ
depending on where the cursor is in the letter
input area or the character palette.
2)
If phrases are stored in the name bank, the first
phrase stored appears in the display (page 21).
Functions Operation
To switch between
katakana, capital letters,
small letters, numbers/
symbols and phrases
1)
.
Press X
To move the cursor to the
left or right.
Pull and turn the
control (VOL +/–).
Functions
1)
Operations
To change the letter to the
one before/next one.
Turn the control
(./N>).
To insert a blank space to
type in a new letter.
Press DISPLAY.
To cancel labeling. Press DISPLAY for
2 seconds or more.
To delete a letter and
move back all following
letters to the left.
Press
PLAYMODE.
1)
If phrases are stored in the name bank, the first
phrase stored appears in the display (page 21).
Functions Operation