Filter
Top Products
30
Storing the settings for
individual discs
(Personal Disc Memory)
See the illustrations in English text (page 65).
The recorder can store the various settings for
each disc, and then retrieve them automatically
whenever the disc is inserted. Do the following
procedure to store the volume, playback mode,
group mode playback, playback order, sound
quality (Digital Sound Preset), and playback
speed (Speed control) settings for a disc.
On the recorder
1 While the recorder is stopped, playing,
or play-paused, press to enter.
2 Turn the jog dial until “PERSONAL”
flashes in the display, and then press to
enter.
“Entry?” flashes in the display.
3 Press the jog dial.
“Entry OK” appears in the display and
the disc settings are stored in the
recorder.
On the remote control
1 While the recorder is stopped, playing,
or play-paused, press DISPLAY for 2
seconds or more.
2 Turn the control repeatedly until
“PERSONAL” flashes in the display,
and then press x to enter.
3 Press x to enter.
To erase information
On the recorder
In step 3, turn the jog dial until “Erase?” flashes
in the display, and then press to enter.
On the remote control
In step 3, turn the control until “Erase?” flashes
in the display, and then press
x to enter.
Notes
• The settings for up to 20 discs can be stored.
Any settings stored afterwards will replace the
settings for the least used disc among the 20.
• If you add tracks or perform an editing
operation (not including labeling) to a disc
whose settings have been stored on the
recorder, the disc will no longer be
recognizable by the recorder and the stored
information will become useless. In this case,
store the settings again.
Turning off the beep
sound
See the illustrations in English text (page 67).
Using the recorder, you can turn off the beep
sound on the recorder and the remote control.
Using the remote control, you can turn off the
beep sound on the remote control only. To turn
off the beep sound by using remote control, see
“Menu functions” (page 90).
1 Press the jog dial.
2 Turn the jog dial until “OPTION”
flashes in the display, and then press to
enter.
3 Turn the jog dial until “BEEP” flashes
in the display, and then press to enter.
4 Turn the jog dial until “MAIN UNIT” or
“REMOTE” flashes in the display, and
then press to enter.
MAIN UNIT: when turning off the
beep sound on the recorder.
REMOTE: when turning off the beep
sound on the remote control.
5 Turn the jog dial until “BEEP OFF”
flashes in the display, and then press to
enter.
To turn on the beep sound
Select “BEEP ON” in step 5.