Filter
Top Products
16
2 If you want to repeat playback in the
selected play mode, press RPT/ENT.
“ ” appears in the display.
Creating a Program (Program
Play)
You can set the program with up to 20 tracks.
On the recorder
1 Press the jog dial while “PGM” flashes
in the display at step 2 of “Selecting a
play mode”.
2 Turn the jog dial to select a track, and
then press to enter a track number.
3 Repeat step 2 to program more tracks.
4 Press the jog dial for 2 seconds or more.
On the remote control
1 While the recorder is playing, press
PLAYMODE repeatedly until “PGM”
flashes in the display.
2 Turn the control repeatedly to select a
track, and then press RPT/ENT to enter
a track number.
3 Repeat step 2 to program more tracks.
4 Press RPT/ENT for 2 seconds or more.
Notes
• All program settings are lost when the lid of
the recorder is opened.
• If you turn group mode on or off during the
setting of a program, program setting mode
will be canceled, but the program contents up
to that point will remain.
• You cannot turn group mode on or off while
programming tracks.
• If you turn group mode on during program
play, the program play is canceled.
Adjusting treble and
bass (Digital Sound
Preset)
See the illustrations in English text (pages 40
and 42).
You can adjust the treble and bass to suit your
taste. The recorder can store two sets of treble-
bass adjustments, which can then be selected
later during playback.
The sound can be adjusted in 8 steps (–4, –3,
...±0, ...+2, +3). Settings can be stored to the
Personal Disc Memory.
Selecting the sound quality
Factory settings of the Digital Sound Preset are
as follows:
• “SOUND1” : bass +1, treble ±0
• “SOUND2”: bass +3, treble ±0
On the recorder
1 Press the jog dial.
2 Turn the jog dial until “SOUND”
flashes in the display, and then press to
enter.
3 Turn the jog dial until “SOUND 1” or
“SOUND 2” flashes in the display, and
then press to enter.
On the remote control
1 Press SOUND on the remote control
repeatedly to select “SOUND 1” or
“SOUND 2”.
Adjusting the sound quality
On the recorder
1 Press the jog dial.
2 Turn the jog dial until “SOUND”
flashes in the display, and then press to
enter.
3 Turn the jog dial until “SOUND 1” or
“SOUND 2” flashes in the display.
The display shows the currently selected
T (treble) and B (bass) settings.
4 Select “T” or “B” pressing x or X.
You can change the adjust of the item in
which the cursor is flashing.