Filter
Top Products
10
You can change the character string by
performing the procedure of “Relabeling
recordings” in “Labeling/relabeling recordings”
(page 18). However, if you rewrite this
character string by mistake, you may be unable
to use the group function of that MD.
Notes
• The group function setting is stored even if you
eject the MD or turn off the recorder.
• In group mode, the recorder treats all tracks
without group settings as belonging to the last
group on the disc. The last group is indicated in
the display window on the recorder as “Group –
–”. Within a group, the tracks appear in their
order on the disc, not their order within the
group.
• Note that a group setting cannot be made if the
total character count for the tracks, groups and
disc name on the disc exceed the maximum
number that can be input.
To activate the group mode
To record tracks in group mode, you must first
turn the group mode on before the start of
recording.
On the recorder
1 Press GROUP for 2 seconds or more.
“G” and “GROUP ON” light up in the
display and the group mode turns on.
To cancel the group mode, press
GROUP for 2 seconds or more.
On the remote control
1 Press DISPLAY for 2 seconds or more.
2 Turn the control repeatedly until
“GROUP” flashes in the display, and
then press x to enter.
3 Turn the control repeatedly until
“GROUP ON” flashes in the display,
and then press x to enter.
“G” lights up in the display and the
group mode turns on.
To cancel the group mode, select
“GROUP OFF” in step 2.
Recording a track into a new
group
• Turn the group mode on.
1 Press END SEARCH.
2 Press and slide REC to the right.
3 Play the source sound.
To stop recording, press x.
The material that was recorded up until x was
pressed is entered as a new group.
Recording a track into an
existing group
• Insert a disc with group settings.
• Turn the group mode on.
1 Press GROUP slightly.
“ ” flashes and you can select a group
directly (group skip mode).
2 Within 5 seconds, press . or >
repeatedly until the group you want the
track to belong to appears.
3 Press and slide REC to the right.
4 Play the source sound.
Newly recorded track is added after the
current contents.
Notes
• Even if “REC-Posi” is set to “From Here”,
newly recorded tracks are inserted after the
existing tracks in the specified group without
recording over the current contents.
• Group skip mode turns off automatically in
step
2 if nothing is done within 5 seconds. To
continue the procedure, do step 1 again.
Recording without
overwriting existing
material
See the illustration in English text (page 28).
If you wish to avoid overwriting the current
contents of an MD, do the following procedure.
All new material will then be recorded from the
end of the current contents.
1 While the recorder is stopped, press the
jog dial.
2 Turn the jog dial until “OPTION”
flashes in the display, and then press to
enter.
3 Turn the jog dial repeatedly until “REC-
Posi” flashes in the display, and then
press to enter.