Filter
Top Products
17
5 Turn the jog dial to adjust the sound
level.
To move the cursor between “T”
to “B”:
Press x or X.
To switch between “SOUND 1” to
“SOUND 2”:
Press X repeatedly to move the cursor
to the top row, and then turn the jog dial.
6 Press the jog dial to enter.
The sound settings are saved and the
playback display appears again.
On the remote control
1 Press SOUND on the remote control
repeatedly to select “SOUND 1” or
“SOUND 2”.
2 During playback, press SOUND for 2
seconds or more.
The recorder changes to B-setting
mode. Pressing the SOUND button for 2
seconds again changes the recorder back
to T-setting mode.
3 Turn the control repeatedly to adjust the
bass or treble.
To switch “B” and “T”:
Press SOUND for 2 seconds or more.
To switch “SOUND 1” and
“SOUND 2”:
Press SOUND for a short time.
4 Press x to enter.
To cancel the Digital Sound Preset
• On the recorder
Select “SOUND OFF” in step 3.
• On the remote control
Press SOUND repeatedly until nothing
appears in the display.
Notes
• Digital Sound Preset becomes inoperative
when the “AUDIO OUT” parameter for the
i/LINE OUT jack is set to “LINE OUT”. In
this case, set the “AUDIO OUT” to
“HeadPhone” (page 7).
• When you use the Digital Sound Preset, the
sound may break or become distorted
depending on the settings or the track. In this
case, change the settings of the sound quality.
• Changing to another Digital Sound Preset
during a recording operation will not affect
the quality of recorded sound.
To change playback
speed (Speed Control)
See the illustrations in English text (pages 42
and 44).
The playback speed can be adjusted in 7 steps
(80%, 85%, ...100%, 105%, 110%).
Setting can be stored to the Personal Disc
Memory.
1 Press DISPLAY for 2 seconds or more
during playback.
2 Turn the control repeatedly until
“SPEED” flashes in the display, and
then press x to enter.
The recorder changes to speed-setting
mode.
3 Turn the control repeatedly to select the
playback speed.
“+” shows the normal speed and the
cursor shows the playback speed you
are selecting.
4 Press x to set the playback speed.
“S” appears in the display when the
speed is changed.
Notes
• The playback sound will be affected by the
playback speed.
• All settings will be lost when you remove the
disc from the recorder (except when the
settings of the disc has been stored to the
Personal Disc Memory).