Filter
Top Products
13
To display the current time
On the recorder
1 When the recorder is not operating or
while recording, press the jog dial.
2 Turn the dial until “DISPLAY” appears
in the display, and then press to enter.
3 Turn the jog dial until “Clock” flashes
in the display, and then press to enter.
The current time appears in the display.
On the remote control
1 Press DISPLAY repeatedly until
current time appears in the display.
To display the time in the 24-hour
system
Press T MARK while setting the clock. To
change the clock to the 12-hour system, press T
MARK again.
To maintain the correct time
Once you set the clock, it will keep correct time
as long as the recorder is connected to a power
source, such as the rechargeable battery,
alkaline dry battery, or AC power adaptor.
However, if no power source is connected, the
clock setting will change back to the factory
setting after about 3 minutes.
When changing the rechargeable battery or
alkaline dry battery, make sure to do it within 3
minutes.
Notes
• Make sure the time is correctly set if you want
the time stamp to be accurately recorded for
an important recording.
• Under normal conditions, the clock may vary
by about plus or minus 2 minutes per month.
B Various ways of
playback
Searching for a specific
track or a position
quickly (Quick Search)
See the illustrations in English text (page 35).
You can do two kinds of quick search.
• Index search — Searching quickly while
monitoring the track numbers or track
names.
• Time search — Searching quickly while
monitoring the elapsed time.
Selecting the search mode
The search mode can be selected only on the
remote control while the recorder is stopped,
playing, or play-paused. The recorder is factory
set to “Index”.
1 Press DISPLAY for 2 seconds or more.
2 Turn the control repeatedly until
“SEARCH” flashes in the display, and
then press x to enter.
3 Turn the control repeatedly until
“Index”(index search) or “Time”(time
search) flashes in the display, and then
press x to enter.
Searching for a specific track
while monitoring track numbers
or track names (Index Search)
To do an index search, set the search mode to
“Index” in advance (page 13).
On the recorder
1 Turn the jog dial until the desired track
appears in the display, and then press
the dial.
The selected track name appears in the
display and the recorder starts playing
by pressing the jog dial.
If the track has no name, the track
number appears in the display.