Sony MHC-GNZ777D Stereo System User Manual


 
73
GB
Other Operations
Listening to a connected TV or
satellite tuner
Press FUNCTION +/– repeatedly (or
press TV/SAT on the unit) to select “TV”
or “SAT”.
To switch between the “TV” and
“SAT” function
Use the buttons on the unit for the
operation.
Hold down TV/SAT and press "/1
STANDBY while the system is turned on.
Release "/1 STANDBY first, then
release TV/SAT. The system switches the
function from “TV” to “SAT” or vice
versa.
Note
If the sound is distorted or too loud when “TV”
is selected, change the function to “SAT”.
Listening to a connected VCR
Press FUNCTION +/– repeatedly to
select “VIDEO” (or press VIDEO on the
unit) and start playing the connected
VCR.
Note
The video signal from the connected VCR is
only output through the VIDEO OUT jack of
this unit.
Enjoying the multi channel sound
with the optional amplifier
(MHC-GNZ777D only)
1 Connect the speakers to an
optional amplifier equipped with a
decoder.
For the speakers placement, refer to the
operating instructions supplied with the
connected amplifier.
2 Start playing a Multi Channel
source, such as a DVD VIDEO.
3 Select the audio format you want.