Sony MHC-GNZ777D Stereo System User Manual


 
72
GB
E D-LIGHT SYNC OUT jack
Connect the D-LIGHT SYNC
controller. You need to connect the
D-LIGHT SYNC controller to a
lighting device* (not supplied). The
lighting device will react according to
the control signals transmitted by the
D-LIGHT SYNC controller upon
receiving music source from the
system. For details on the use of the
D-LIGHT SYNC controller and
lighting device, refer to the operating
instructions supplied with the
respective device.
* Refer to the operating instructions
supplied with the D-LIGHT SYNC
controller for the recommended lighting
device.
Note
The lighting effect may be different
depending on the connected lighting device
or the type of music being played back.
F COMPONENT VIDEO OUT jacks
Use a component video cords to
connect to the component video input
jacks of a TV or projector. If your TV
accepts progressive format signals,
you must use this connection. You
can enjoy higher quality video
images.
Note
You cannot output the video signal from
the VIDEO INPUT VIDEO jack through
the COMPONENT VIDEO OUT jacks of
this unit.
G S VIDEO OUT jack
Use an S video cord to connect to the
S video input jack of a TV. You can
enjoy higher quality video images.
Note
You cannot output the video signal from
the VIDEO INPUT VIDEO jack through
the S VIDEO OUT jack of this unit.
H VIDEO OUT jack
Use a video cord to connect to the
video input jack of a TV.
D-LIGHT SYNC
controller cord