22
GB
Notes
• Do not place the surround speakers on top of
a TV. This may cause distortion of the colors
in the TV screen.
• Do not place the surround speakers further
away from your listening position than the
front speakers.
• If you place the center speaker on the unit, be
sure to place it at the front side of the unit.
• Place the subwoofer on solid floor where
resonance is unlikely to occur so that a better
bass reproduction could be obtained.
• Always place the subwoofer vertically,
keeping it a few centimeters away from the
wall.
• If the subwoofer is placed in the center of a
room, the bass could be extremely weakened.
This is due to the influence of the standing
wave of the room. If this happens, move the
subwoofer away from the center of the room
or eliminate the cause of the standing wave,
by placing a bookshelf against the wall, etc.
Speaker settings
To enjoy DVD VIDEOs and other discs
with multi-channel sound and Dolby
surround effects, you need to adjust the
speaker settings.
For details, see “Setting the speakers
1)
–
SPEAKER SETUP” on page 50.
Setting the clock
1
Press "/1 (or "/1 STANDBY on
the unit) to turn on the system.
2 Press TIMER MENU.
The hour indication flashes in the
display.
If “PLAY SET” flashes in the display,
press
V or v repeatedly to select
“CLOCK SET”, then press ENTER.
3 Press V or v repeatedly to set
the hour.
4 Press ENTER.
The minute indication flashes in the
display.
5 Press V or v repeatedly to set
the minute.
6 Press ENTER.
The clock starts functioning.
Note
The clock settings are canceled when you
disconnect the power cord or if a power failure
occurs.