Sony MHC-GNZ777D Stereo System User Manual


 
58
GB
Adjusting the sound
You can reinforce the bass and create a
more powerful sound.
The GROOVE setting is ideal for music
sources, and the V-GROOVE setting is
ideal for video sources (movie, etc.).
Press GROOVE on the unit
repeatedly.
GROOVE ON* t V-GROOVE ON* t
GROOVE OFF t GROOVE ON t
* The volume switches to power mode and the
equalizer curve changes.
Tip
The default setting is “GROOVE ON”.
Use the buttons on the unit for the
operation.
Press PRESET EQ repeatedly to
select the preset effect you want.
Preset effect options
Adjusting the graphic equalizer and
storing the user equalizer setting
You can adjust the sound by raising or
lowering the level of specific frequency
band, then store up to three user equalizer
settings in the memory.
Use button on the unit for the operation.
1 Press EQ BAND/MEMORY
repeatedly to select a frequency
band.
2 Turn . OPERATION DIAL >
clockwise or counterclockwise to
adjust the level.
3 Repeat steps 1 and 2 to adjust the
level of frequency band “MID”.
4 Repeat steps 1 and 2 to adjust the
level of frequency band “HIGH”.
5 Press EQ BAND/MEMORY.
A user equalizer number flashes in the
display.
6 Turn . OPERATION DIAL >
clockwise or counterclockwise to
select a user equalizer number
(1~3) you want to store the
equalizer setting. Select “EXIT” to
cancel storing.
7 Press EQ BAND/MEMORY.
This setting is automatically stored as
the user equalizer setting you selected
in step 5.
The previous setting stored at this
memory location is erased and replaced
by the new setting.
Sound Adjustment
Reinforcing the sound
Selecting the preset effect
Effect Category
ROCK, POP,
JAZZ, DANCE,
SOUL, TECHNO,
HIP HOP
Standard music sources
MP3 EQ MP3 audio tracks
FLAT Original music source
(cancel the preset effect)
USER EQ 1, 2, 3 User equalizer setting
(see below)
1 1 1
B
B
A
Frequency band
Frequency level