Filter
Top Products
67
GB
Other Operations
Changing the display
— Power Saving Mode
The demonstration display and the clock
display can be turned off to minimize the
amount of power consumed during
standby mode (Power Saving Mode).
Press DISPLAY repeatedly while
the system is turned off.
Demonstration
1)
t No display (Power
Saving Mode) t Clock
2)
t
Demonstration t …
1)
The display changes and the indicators flash
even when the system is turned off.
2)
The clock display automatically turns to
Power Saving Mode after 8 seconds.
Note
You cannot perform the following operations
during Power Saving Mode:
– Setting the clock (page 22).
– Changing the AM tuning interval (page 54).
– Turning on the system by pressing DVD,
TUNER/BAND, TAPE A/B, TV/SAT or
VIDEO on the unit.
– Changing the color system (page 19).
Press ILLUMINATION on the unit
repeatedly to select the power
illuminator you want when the
system is turned on.
PATTERN 1 t PATTERN 2 t
PATTERN 3 t PATTERN OFF t
PATTERN 1 t …
Notes
• When you press VOLUME +/– (or turn
MASTER VOLUME on the unit), the power
illuminator shows the current volume level.
• During the demonstration display, you can
turn on or off the power illuminator by
pressing ILLUMINATION on the unit.
Viewing information
about the disc
Press DISPLAY repeatedly.
Each time you press DISPLAY, the
display changes from 1 t 2 t 3 t
1 t …
1 Disc information
2 Clock display (for 8 seconds)
3 Effect name (for 8 seconds)
Checking the elapsed playing time,
remaining time and titles
Press TIME/TEXT repeatedly during
playback. Each time you press TIME/
TEXT, the display changes from 1 t
2 t … t 1 t …
When playing a DVD VIDEO or
DVD-R/-RW in VR mode:
• When the menu or the title without a
chapter is played back
1 Elapsed playing time of the menu or
the current title
2 Title of the disc
1)
• When a chapter other than above
condition is played back
1 Elapsed playing time of the current
title
2 Remaining time of the current title
3 Elapsed playing time of the current
chapter
4 Remaining time of the current
chapter
5 Title of the disc
1)2)
Turning off the display
Changing the power
illuminator
Viewing information about the
disc in the front panel display
Continued
l