Filter
Top Products
24
GB
8 (MHC-GNZ888D only)
Press
V or v repeatedly to
select the front speaker distance
from your listening position,
then press ENTER.
Repeat this step to adjust the center and
surround speaker distance.
The setting is selected and “QUICK
SETUP is complete.” appears on the
TV screen.
The system is ready for playback.
If you want to change each setting
individually, see “Using the DVD
setup menu” on page 46.
To quit QUICK SETUP
Press DISPLAY.
To recall QUICK SETUP
1 Press DISPLAY when playback
is stopped.
The Control Menu appears on the TV
screen.
2 Press V or v repeatedly to select
(SETUP), then press
ENTER.
3 Press V or v repeatedly to select
“QUICK”, then press ENTER.
Note
The guide message appears at the bottom of the
TV screen when you turn on the system for the
first time or after performing “RESET”
(page 81).
Using the THEATRE
SYNC function
THEATRE SYNC allows you to turn on
your Sony TV and this system, changes
the system’s function to “DVD” and then
switches the TV’s input source you have
set with just one button.
Install the unit near the TV, then register
the TV’s input source connected to this
system.
The selected TV’s input source is
memorized into the remote.
Preparing to use the THEATRE
SYNC function
Hold down
SLEEP and
press
To select the following
TV’s input source
0 No input source
(Default)
1 to 8 VIDEO 1 to VIDEO 8
9 COMPONENT 1
CLEAR COMPONENT 2
– COMPONENT 3
+ COMPONENT 4