Filter
Top Products
40
GB
Additional Information
Setup Menu Chart
You can make various settings on this unit by using the
Setup Menu. Operation related to each menu were
explained in the previous sections. The table below
outlines each menu, including the various parameters and
initial settings.
Number
Function Parameters See page
01
To create a program – 20
To specify hot-start tracks –
Erases the track mark stored at the pad –
Determines the point at which playback will start
when AMS is rotated.
JOG : (Track / Cue)
Turns resume play on or off Resume (Off / Play)
Determines whether the unit will assign track
numbers automatically when recording analog
sources.
L.Sync (Off / On)
Determines the reference input level to be used
with the L.Sync On setting.
LS(T) : (–72 dB ~ –0 dB) 25
Determines the low level length to be used with
the L.Sync On setting.
LS(W) : (0s ~ 9.5s)
Determines the track number timing to be used
with the L.Sync On setting.
LS(O) : (–9s85f ~ 9s85f)
07
Determine the auto cue reference level AC(T) : (–72 dB ~ –0 dB)
Determine the auto cue interval AC(O) : (–9s85f ~ 9s85f) 14
11
Initial setting
To enter the Setup Menu
• Press EDIT/NO twice during stop mode.
• Press EDIT/NO once to display the Edit Menu, turn
AMS to display “Setup Menu?”, then press AMS.
02
03
04
05
06
–
–
–
JOG : Track
Resume Off
L.Sync Off
LS(T) : –50 dB
LS(W) : 1.5s
LS(O) : 0s00f
AC(T) : –50 dB
LS(O) : 0s00f
08
09
10
Determines the rehearsal playback length. RH(L) : (0s00f ~ 9s85f)
Determines the rehearsal playback interval. RH(I) : (0s ~ 8.0s) 28
13
RH(L) : 2s00f
RH(I) : 1.0s
12
16
13
14
21
25
25
25
14
28
Edit Menu Chart
You can perform various edit operations on this unit by
using the Edit Menu. In addition, the Setup Menu is also
located within the Edit Menu. Although each menu
operation was explained in previous sections, we have
included the chart at right for your reference.
Notes
• The available menu operations change according to the current
mode of operation (stop, playback, and recording).
• Certain menus may contain other additional menus.
To enter the Edit Menu
Press EDIT/NO.
Display Function See page
Name? Name disc or track 32
Erase? Erase a track 31
Move? Change track number 30
Combine? Combine two tracks 29
Divide? Divide a track 28
All Erase? Completely erase the disc 32
Undo? Undo previous edit operation 35
Setup Menu? Enter the Setup Menu 40