Filter
Top Products
27
GB
Editing a Recorded MD
Editing a
Recorded MD
This chapter explains how to edit the
tracks on a recorded MD.
Notes on Editing
After recording an MD, you can use the editing functions
to divide tracks for instant access to any point on the disc
or combine any two tracks into a single track. You can also
erase tracks simply by specifying track numbers, name
the disc, and name individual tracks.
If “Protected” and “C11” appear in the display
The disc cannot be edited because its record-protect slot is
open. Close the record-protect slot before editing the disc.
After editing “TOC” blinks in the display
Eject the disc or press ENTER/YES. “TOC” and “TOC
Writing” blink in the display and the unit writes the edit
information to the disc. Do not press U to turn off the
power, pull out the AC power cord, or move the unit
while “TOC” and “TOC Writing” are blinking. This may
prevent the information from being stored.