Filter
Top Products
26
GB
Recording on an MD
If the BACK TRACK RECORDING indicator starts
blinking during recording
Stop using the pad, scrub dial, and loop functions until
the indicator lights steadily. Continuing to use these
functions may cause the unit to stop recording. Also, once
the indicator lights steadily, wait a few seconds before
resuming pad, scrub dial, or loop operations.
Notes
• You can not monitor to the sound being recorded during
backtrack recording.
• When recording an analog source, you can turn REC VOL to
adjust the recording level but you cannot monitor the sound.
• During backtrack recording, the peak level meters in the
display indicate the playback level (not the recording level).
• Frequently repeating loop, pad, or scrub dial operations may
cause recording to stop.
• Track marking is not possible during back track recording.
• The 0/) buttons cannot be used during backtrack
recording.
• REC PAUSE can not be used to stop backtrack recording. Press
STOP to stop during backtrack recording.
• Recording will stop if the position of the INPUT switch is
changed during backtrack recording.
Recording during Playback
(Backtrack recording)