Filter
Top Products
34
GB
Editing a Recorded MD
Erasing a disc or track name (Name Erase)
Use this function to erase the name of a disc or track.
1 During stop, play, or pause mode, press EDIT/NO to
display the Edit Menu.
2 Turn AMS to display “Name ?”, then press AMS.
This step is not necessary during recording.
3 Turn AMS to display “Nm Erase ?”, then press AMS.
4 Turn AMS to specify whether you wish to erase the
disc or track name.
• To erase the disc name, turn AMS to display “Disc”
• To erase the track name, turn AMS so that the track
number with the name you want to erase blinks in
the display.
5 Press AMS.
“Complete!!” appears for a few seconds and the name
is erased.
To cancel without erasing the name
Press EDIT/NO or STOP.
Naming Discs and Tracks (Name)
Erasing all the names on a disc (Name All
Erase)
This function erases all the track names and the disc name
in a single operation.
1 During stop, play, or pause mode, press EDIT/NO to
display the Edit Menu.
2 Turn AMS to display “Name ?”, then press AMS.
3 Turn AMS to display “Nm AllErs ?”, then press AMS.
“Nm All Ers??” appears in the display.
4 Press AMS again to erase the MD.
“Complete!!” appears for a few seconds and all of the
names on the disc are erased.
To cancel without erasing all the names
Press EDIT/NO or STOP.
z
You can undo the erase
Use the undo function immediately after erasing the MD (see
page 35).
z
To erase all of the contents of the MD (all tracks and titles)
See “Erasing the Entire Disc (All Erase)” on page 32.