Sony DAVHDX279W Stereo System User Manual


 
Step5: Performingthe
QuickSetup
Folk)w the Steps below to make the basic
adjustments for using the system.
When you connect the system and the TV with the
component video cord (not supplied) or HDMI cable
(not supplied), you need to set the type of video
output lkirmatching your TV. For details, see"Sclting
the type of video output to match your TV" (page 46).
÷/'1"/4./+, F>
1
2
I/_J
iiiili (+
ii_ ;7i ii:[;;i:
7; iiili iii_i 21i
iiii: !:ii;i !iiii_i
_;7_i i7117i711_71
iii_i_ iiilJ7
ii171]i
1:ii===)i!{::{{i)i {[i;ii:ii i
hii_i
!i
Turn on the TV.
(DAV-HDX277WC)
Press I/(_)on the unit.
(DAV-H DX279W/DAV-H DX576WF)
Press I/_ on the unit, and POWER on
the surround amplifier.
• Make s/ire that the l]mction is set to "DVD'>
(page 47).
3 Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
IPress[ENTER] to ruil QUICK SETUP.]
appears at the bottom of the TV screen. If
this message does not appear, recall the
Quick Setup display (page 45) and perform
again.
4 Press @ without inserting a disc.
5
6
7
8
9
The Setup Display for selecting the
language used in the on-screen display
appears.
!¸!77'ANGUAGESETUP
Press ,1,/4, to select a language.
The system displays the menu and subtitles
in the selected language.
Press @.
The Setup Display for selecting the uspect
ratio of the TV to be connected appears.
v,0 o mo
Press ,1,/4,to select the setting that
matches your TV type.
If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
[16:_] (page 69)
If you have a 4:3 standard TV
[4:3 LETTER BOX] or 14:3 PAN SCAN]
(page 69)
Press _.
The Setup Display t_)r selecting the speaker
lormation appears.
Press ÷/÷ to select the speaker
formation image as the speakers are
actually positioned.
For details, see "Getting Optimal Surround
Sound for a Room" (page g9).
44us