Filter
Top Products
Step 1: Assemblingthe Speakers
(DA V-HDX576WF only)
Belie)re connecting tile speakers, attach tile speaker stand to tile speaker.
(For the front speakers)
Use the parts as lk)llows:
• Front speakers (2)
• Speaker cords (2, red/white)
• Posts (2)
• Bases (2)
• Mounting plates (2)
• Post covers (2)
• Screws (large, with washer) (4)
• Screws (small) (6)
About how to connect tile speaker cords to the SPEAKER jacks, see page 25.
• Spread a cloth on the floor to avoid damaging the floor when you assemble the speakers.
• You can use the speaker without the speaker stand by installing it onthe wall (page 18).
I
1 Thread the speaker cord through the hole in the base and post.
Tile connector and color tuhe of the speaker cords are tile same color as the label of tile jacks to he
connected.
Use the speaker cords as lollows:
• Front speaker (L): White
• Front speaker (R): Red
Be careful with the orientation of the post. Thread the speaker cord (and the speaker system cord)
into the end of the post that has two holes.
Speakercord
Bottom of the base
Top ofthe base
Two holes
13Us