Sony DAVHDX279W Stereo System User Manual


 
Symptom
The system does not work
normally.
The Control for HDMI function
does not work.
No sound is output from the
system and TV while using the
System Audio Control function.
The S-AIR function
Remedy
Disconnect the AC power cord (mains lead) from the _r_]]outlet (mains), then
reconnect afler several minutes.
• When "HDMI"does not light up inthe front panel display, check the HDMI
connection (page 28).
• Setthe ]CONTROL FOR HDMI] setting in [HDMI SETUP] to ION] (page 71).
• Make sure that the connected component is compatible with the ]CONTROL
FOR HDMI] lhnction.
Check that the AC power cord (mains lead) of the connected component is
connL, cted sL, cu rely.
• Check the connected component_s setting for the Comrol for HDMI filnction
RelL.rto the operatinginstructions supplied with the component
Ifyou change the HDMI connection, connect and disconnect the AC power
cord (mains lead), or have a power failure, set the ]CONTROL FORHDMI]
setting in[HDMI SETUP] to [OFF], then set the [CONTROL FOR HDMI]
setting in [HDMI SETUP] to [ON] (page 71).
• For details, see "Using the Control for HDMI Function for "BRAVIA" Sync"
(page 79).
• Set the [AUDIO (HDMI)] setting in ]CUSTOM SETUP] to ION] (page 71).
• Make sure that the connected TV is compatible with the System Audio Control
fimction.
Fordetails, see "Using the Control for HDMI Function for "BRAVIA" Sync"
/page 79).
Symptom
S-AIR connection is not
estahlished (sound transmission
is not established), e.g., the
indicator of the S-AIR sub unit
does the following:
• Turns off.
• Flashes.
• Turns red.
No sound is heard from the
S-AIR product
Remedy
If you use another S-AIR main unit, place it more than 8 m 126 % IL'et) _l_r_l_'
from the unit.
• Confirm the ID of the unit and S-AIR sub unit (page 83).
• You performed pairing the unit and another S-AIR sub unit. Perform pairing of
the desired S-AIR sub unit (page 86).
• The unit is paired to another S-AIR suh unit. Cancel pairing.
Install the S-AIR main unit and S-AIR sub unit away from other wireless
products.
Stop using another wireless product.
• The S-AIR sub unit is turned off. Make sure the AC power cord (mains lead) is
connected and turn on the S-AIR sub unit.
If you use another S-AIR main unit, place it more than 8 m 126 % IL,et) away
from the unit.
Confirm the ID of the unit and S-AIR sub unit (page 83)
Confirm the pairing setting (page 86).
Install the S-AIR main unit and S-AIR sub unit closer together.
Avoid use of equipment that generates electromagnetic energy, such as a
microwave ()veil.
Install the S-AIR main unit and S-AIR sub unit away from other wireless
products.
Stop using another wireless product.
Change the "RF CHANGE" setting (page 87).
• Change the ID settings of the S-AIR main unit and S-AIR sub unit.
• Turn off the system and S-AIR sub unit, then turn on them.
104Us