Filter
Top Products
14
HCD-PX333
CD SECTION
CD AGING MODE
Procedure:
1. Press the ?/1 button to turn the power on.
2. Press the [FUNCTION] button to set the CD function, and press the Z (CD) button to insert a disc.
3. Press three buttons of x (CD) , [ TUNING
-
] and x (MD) simultaneously.
4. The set displays “AGING SEL=00”. Between it is displayed, press the Z (CD) button to start CD aging mode.
5. The sequence during the CD aging mode is following as below.
Note: If the triple button pressing failed to activate the CD test mode, press the [ TUNING
-
] button, and the x (MD) button in this
order while pressing the x (CD) button. Also, release the x (MD), [ TUNING
-
] and x (CD) buttons in this order, when
releasing the buttons.
CD aging mode sequence:
6. To release from this mode, press the
?/1 button to turn the power off.
Note: Refer to “Error History Display Mode” (page 5) for display at an error occurred.
CD disk tray open
CD disc tray close
TOC read
Playback track 1
Playback last track
Display aging number
.m
.m
.m