Filter
Top Products
Page 67 of 78
i n t e l l i g e n t w i r e l e s s p l a t f o r m
airClient™ Nexus PRO TOTAL User Guide
Figure 7-6 Scheduling a Profile
Link Test
The Link Test utility is available from the navigation menu bar in the ‘Tools | Link Test’ drop down menu.
From the Link Test tools, the user can test Throughput and perform Ping Test. You can run Radio
Transmit or Radio Receive. The remote device will automatically start receiving /transmitting (provided an
airPoint Nexus is used).
The remote radio IP address has to be specified for the test.
Follow the steps below to do a Ping Test:
1. Enter a valid IP address for Far-end Radio IP Address.
2. Click on the ‘Start’ button under ‘Ping’. The Ping result will be displayed.
3. Click on the ‘Stop’ button to stop the test.