Filter
Top Products
Page 44 of 78
i n t e l l i g e n t w i r e l e s s p l a t f o r m
airClient™ Nexus PRO TOTAL User Guide
3.2. Bandwidth Controller
Using the Bandwidth Controller on the aCNPT, the user can limit the wireless link bandwidth for the
upload/download speed. The default is disabled and provides bandwidth up to 6Mbps. This is subject to
the available upstream bandwidth, signal level and distance.
The user can key in the upload and download bandwidth for the wireless link.
Follow the steps below to change the bandwidth parameters:
1. From the menu bar click on ’Networking | Bandwidth Controller’ drop down menu item.
2. Click on the Bandwidth Controller ’Enable’ radio button.
3. Enter the desired value for upload and download.
4. Click on the “Go to Advanced Settings “ to provide Bandwidth Control based on IP or MAC and
click “Add to list” to save the defined settings.
5. In order to remove or delete the defined settings, Click on “Delete Selected Rules”.
6. Click on the ’Apply Changes’ button to effect the changes.
Figure 3-2 aCNPT Bandwidth Controller