Filter
Top Products
ENGLISH
51
After performing the steps ~ in "Adjusting the current channel level" procedure on page
50, press the CURSOR UP(
)/DOWN( ) buttons to select the MODE(memory mode), then
press the ENTER button.
1
Memorizing the adjusted channel levels
• You can memorize the adjusted channel levels into preset memory("REF 1", "REF 2") and recall the
memorized whenever you want.
• The "REF 1" indication flickers.
• Each time the CURSOR LEFT(
) or RIGHT( )
button is pressed, "REF 1" or "REF 2" is
selected.
• The adjusted channel levels have now been
memorized into the selected memory.
Press the CURSOR LEFT(
)/RIGHT( ) buttons to select the desired preset memory,
then press the ENTER button.
2
• "CALIBRATE" may be displayed instead of
"REF 1" or "REF 2".
Press the CURSOR UP( )/DOWN( ) buttons to select the MODE(memory mode).
1
• Then the channel levels memorized into the
selected preset memory are recalled.
Press the CURSOR LEFT(
)/ RIGHT( ) buttons to select the desired one of REF 1 and
REF 2.
2
Recalling the memorized channel levels
ENTERENTER
CH.LEVELCH.LEVEL
CHANNELCHANNEL
ENTERENTER
CH.LEVELCH.LEVEL
CHANNELCHANNEL