Sherwood R-771 Stereo Receiver User Manual


 
ENGLISH
32
• The audio signal from the CD and the video
signal from the VIDEO 2 will be dubbed and
you can enjoy them on the TV set and from the
speakers.
Note: Be sure to observe the order of the
above steps
and .
Start recording on the VIDEO 1.
3
Start play on the VIDEO 2 and the CD
respectively.
4
DIGITAL AUDIO RECORDING WITH MD RECORDER
For digital recording, select the digital
input as recording signal input.
2
Select the desired of CD, VIDEO 1~3
as a recording source.
1
Start recording on the component
connected to the OPTICAL DIGITAL
OUT.
3
• Only when the OPTICAL DIGITAL OUT of this receiver is connected to the OPTICAL DIGITAL IN of the MD recorder or CD
recorder, you can enjoy high-quality sound of digital recording without converting the original signals. Refer to "CONNECTING
VIDEO COMPONENTS", "CONNECTING AUDIO COMPONENTS" and "CONNECTING DIGITAL INs and OUT" on pages
6~8 and the operating instructions of the MD recorder or CD recorder.
Notes:
• Digital recording is available for the digital audio program sources such as CDs, MDs, some DVDs, etc.
• In most DVDs as well as some CDs, etc., digital recording may not be available depending on the signal format.
• There are some restrictions on recording digital signals. When making digital recordings, refer to the operating instructions of
your digital recording equipment to know what restrictions are imposed.
Start play on the desired input.
4
Note :
• When the digital signals are not input from the
selected digital input, there will be no recording.
(For details, refer to "When CD,VIDEO 1 ~ 3 is
selected as an input source" on page 22 or
"When selecting the DIGITAL AUDIO" on page
40.)
ENTERENTER
CH.LEVELCH.LEVEL
CHANNELCHANNEL
ENTERENTER
CH.LEVELCH.LEVEL
CHANNELCHANNEL