Filter
Top Products
ENGLISH
31
RECORDING
Start recording on the TAPE.
2
Select the desired input as a recording
source except for TAPE.
1
Recording with TAPE
Select the desired of VIDEO 2 ~ 4 as a
recording source except VIDEO 1.
1
Dubbing from video components onto
VIDEO 1
Select VIDEO 2 as a video recording
source.
1
Dubbing the audio and video signals
separately onto VIDEO 1
Start play on the desired input.
3
Select CD as an audio recording
source.
2
Start recording on the VIDEO 1.
2
Start play on the desired input.
3
• The audio and video signals from the desired
input will be dubbed onto the VIDEO 1 and you
can enjoy them on the TV set and from the
speakers.
Example) When dubbing the VIDEO 2 video signal and
the CD audio signal separately onto VIDEO 1.
• The analog signals from the EXTERNAL INs as well as the digital signals from the coaxial or optical digital input can be heard
but cannot be recorded.
• When recording the analog signals from CD, VIDEO 1~3, be sure to select the analog input.
(For details, refer to "When CD, VIDEO 1~3 is selected as an input source" on page 22.)
• The volume and tone (bass, treble) settings have no effect on the recording signals.
ENTERENTER
CH.LEVELCH.LEVEL
CHANNELCHANNEL
ENTERENTER
CH.LEVELCH.LEVEL
CHANNELCHANNEL
ENTERENTER
CH.LEVELCH.LEVEL
CHANNELCHANNEL
ENTERENTER
CH.LEVELCH.LEVEL
CHANNELCHANNEL
• To record the analog signals onto the recording
equipment connected to TAPE, be sure to
connect the ROOM 2/TAPE OUT jacks to the
recording equipment and to assign the output to
TAPE REC. (For details, refer to "CONNECTING
AUDIO COMPONENTS" on page 8 and "When
selecting the OUT ASSIGN" on page 37.)