Filter
Top Products
ENGLISH
28
Memorizing the adjusted channel levels
• The "1" of "REF 1" indication flickers for several
seconds.
After performing the steps
~ in "Adjusting the current channel level" procedure on page 27,
press the (MEMORY/) ENTER button.
1
Select the desired one of REF 1 and
REF 2.
2
Confirm your selection.
3
• You can memorize the adjusted channel levels into preset memory("REF 1", "REF 2") and recall the
memorized whenever you want.
• The adjusted channel levels have now been
memorized into the selected memory.
Press the CHANNEL LEVEL button.
1
Select the desired one of REF 1 and
REF 2.
2
Recalling the memorized channel levels
• "REF 1" (or "CAL") is displayed for several
seconds.
• If the channel level mode display disappears,
press this button again.
• Then the channel levels memorized into the
selected preset memory are recalled.
ENTERENTER
CH.LEVELCH.LEVEL
CHANNELCHANNEL
ENTERENTER
CH.LEVELCH.LEVEL
CHANNELCHANNEL
ENTERENTER
CH.LEVELCH.LEVEL
CHANNELCHANNEL
ENTERENTER
CH.LEVELCH.LEVEL
CHANNELCHANNEL
ENTERENTER
CH.LEVELCH.LEVEL
CHANNELCHANNEL
• If the preset memory disappears, perform the
above step
again.