Sharp UP-3300 Stereo System User Manual


 
59
Computation of VAT (Value Added Tax)/Tax
VAT/tax system
The POS terminal may be programmed for the following six tax systems by your authorized SHARP dealer.
Automatic VAT 1 through 6 system (Automatic operation method using programmed percentages)
This system, at settlement, calculates VAT for taxable 1, taxable 2, taxable 3, taxable 4, taxable 5, and
taxable 6 subtotals by using the corresponding programmed percentages.
Automatic tax 1 through 6 system (Automatic operation method using programmed percentages)
This system, at settlement, calculates taxes for taxable 1, taxable 2, taxable 3, taxable 4, taxable 5, and
taxable 6 subtotals by using the corresponding programmed percentages, and also adds the calculated
taxes to those subtotals, respectively.
Manual VAT 1 through 6 system (Manual entry method using programmed percentages)
Procedure
SUB TOTAL
VAT
This system provides the VAT calculation for taxable 1, taxable 2, taxable 3, taxable 4, taxable 5, and
taxable 6 subtotals. This calculation is performed using the corresponding programmed percentages when
the
VAT
key is touched just after the
SUB TOTAL
key.
Manual VAT 1 system (Manual entry method for subtotals that uses VAT 1 preset percentages)
Procedure
VAT rate
To use a programmed rate
SUB TOTAL
VAT
This system enables the VAT calculation for the then subtotal. This calculation is performed using the VAT 1
preset percentages when the
VAT
key is touched just after the
SUB TOTAL
key. For this system, the keyed-in tax
rate can be used.
Manual tax 1 through 6 system (Manual entry method using programmed percentages)
Procedure
SUB TOTAL
VAT
This system provides the tax calculation for taxable 1, taxable 2, taxable 3, taxable 4, taxable 5, and taxable
6 subtotals. This calculation is performed using the corresponding programmed percentages when the
VAT
key is touched just after the
SUB TOTAL
key. After this calculation, you must finalize the transaction.
Automatic VAT 1 through 3 and tax 4 through 6 system
This system enables the calculation in the combination with automatic VAT 1 through 3 and tax 4 through 6.
This combination can be any of VAT 1 through 3 and tax 4 through 6. The tax amount is calculated
automatically with the percentages previously programmed for these taxes.