Filter
Top Products
182
■ Employee
You can program various items for each employee.
Program each item as follows:
• EMPLOYEE (Use the numeric entry)
Employee code (max. 10 digits: 0000000001 to 9999999999)
• SECRET CODE (Use the numeric entry)
Secret code (max. 4 digits: 0001 to 9999)
• NAME (Use the character entry)
Name for the employee.
Up to 12 characters can be entered.
•*
1
CLERK CODE (Use the numeric entry)
Clerk code (max. 4 digits: 0001 to 9999)
• MANAGER CODE (Use the numeric entry)
Manager code (max. 2 digits: 01 to 99)
The manager who is responsible or capable for adjustments
to the employee’s hours.
• DAILY WORK TIME (Use the numeric entry)
Standard number of hours for which the employee should
work a day (max. 3 digits: 0 to 99.9)
•*
2
LOCATION#1 through #4 (Use the numeric entry)
Job location table number (max. 2 digits: 01 to 99)
NOTE
*
1
The clerk whom an employee code has been assigned cannot
time in unless the corresponding employee times in.
*
2
If no job location table number is programmed for an
employee time-in operation, the location no. 1 will be
assigned. Therefore, make sure to program a job location
table number for “LOCATION#1.
Procedure
▼
▼
Pertinent
employee code
➞
ENTER