Sanyo DWM-3500 Home Theater System User Manual


 
-E62-
Manual presetting
1. Press [AM/FM] to select FM or AM.
2. Tune in the station to be preset as described in Automatic/
Manual Tuning.
3. Press [SETUP/MENU].
Preset number blinks.
4. While preset number is blinking, press [PRESET] + or to
select the channel to be preset.
The number buttons on the remote control can also be
used.
In this example, the channel is 9.
5. While preset number is blinking, press [ENTER].
Preset number blinking stops.
6. Press [SETUP/MENU].
Preset number disappears.
In this example, 103.1 MHz FM station is preset on FM
channel 9.
7. Repeat steps above to add more preset stations.
When presetting a new station, the previous preset station
is cleared.
Listening to Preset Stations
1. Press [AM/FM] to select FM or AM.
2. Press [PRESET] + or briefly to select the desired channel.
If using the number buttons, press the number button(s),
then press [ENTER].
Example:
To select preset number 3, press [0] [3], then [ENTER].
To select preset number 12, press [1] [2], then [ENTER].
Note:
Usually, when receiving the FM stereo broadcast you enjoy FM
stereo sound, if the signal from the station becomes weak, the
tuner automatically sets to monaural reception.
5
4
Number
buttons
3, 6
1
ENTER
1
2
Number
buttons
VIDEO IN L
-
AUDIO IN
-
R
POWER
VOLUME
EJECT
REC
CHANNEL
AM/FM
VCR/DVD
PRESET
+
-
OPEN/CLOSE
STOP
PLAY
AM/FM PRESET +/–
2B80201A [E] P50-BACK 24/2/03, 7:16 PM62