Sanyo DWM-3500 Home Theater System User Manual


 
-E20-
Common Operation
VIDEO IN L
-
AUDIO IN
-
R
POWER
VOLUME
EJECT
REC
CHANNEL
AM/FM
VCR/DVD
OPEN/CLOSE
STOP
PLAY
a
Turning the power on and off
Press [POWER] to turn the power on.
(After connecting the power cord, when you press [POWER] for
the first time, the volume-reset feature automatically sets the
initial volume level.)
When the power cord is connected to the AC outlet, the unit will
respond to commands from the remote control.
To turn the power off, press [POWER] again.
Selecting the source
Remote control operation
Press [VCR] to select the VCR function.
Press [DVD] to select the DVD function.
Press [AM/FM] to select the Tuner function.
Press [INPUT] repeatedly in the VCR function to select the
external source connected to AUDIO/VIDEO IN jacks on the
front panel or original source.
Notes:
When the source is selected the DVD or Tuner function,
you cannot use [INPUT] button.
When the source selection is changed to the Tuner function,
disc and tape playback automatically stops.
Front panel operation
Press [VCR/DVD] repeatedly to select the VCR or DVD
function.
Press [AM/FM] to select the Tuner function.
Adjusting the volume
Rotate [VOLUME] on the front panel (or press [VOLUME] + or
on the remote control). The volume level appears on the FL
display (Vol 0 ~ Vol 40).
Note:
Set the TVs built-in speaker volume to minimum.
4
5
Adjusting the bass, treble and speaker level
1. Press [SOUND].
BA appears on the FL display.
2. Press [ENTER] repeatedly to select the desired sound mode.
Each time [ENTER] is pressed, the sound mode changes as
follows:
BA (Bass) v TR (Treble) v FL (Front left speaker) v
C (Center speaker) v FR (Front right speaker) v
SR (Surround right speaker) v SL (Surround left speaker)
v SU (Subwoofer) v BA (Bass)
3. Press [4] or [5] to adjust the sound level.
BA/TR: +5 ~ “–5.
FL/FR: 0 ~ “–10.
C/SR/SL/SU: +10 ~ “–10.
4. Repeat steps 2 ~ 3 for another sound mode.
You can also use the menu screen to adjust the speaker
level. See Adjusting the Speaker and Subwoofer Level on
page E22.
Bass boost system
Press [BASS BOOST].
BA appears on the FL display.
Press the button repeatedly to select the bass boost effect ON or
OFF.
BA ON v BA OFF v BA ON...
BEFORE OPERATION
2B80201A [E] P17-26 24/2/03, 7:13 PM20