Sanyo DWM-3500 Home Theater System User Manual


 
-E27-
VIDEO CASSETTE TAPE PLAYBACK
Loading and Unloading a Cassette Tape
Use only video cassette tapes marked and .
Loading
Push the center of the tape until it is automatically inserted.
Insert the cassette tape with its labeled side facing up and the
erase prevention tab positioned at your left. An inverted cassette
tape cannot be inserted.
Erase prevention tab
Automatic power ON
When you insert a cassette tape, the unit will turn ON
automatically.
Automatic playback
When loading a cassette tape without an erase prevention tab,
playback will start automatically.
Unloading
1. Press [q EJECT] on the unit.
VIDEO IN L
-
AUDIO IN
-
R
POWER
VOLUME
EJECT
REC
CHANNEL
AM/FM
VCR/DVD
PRESET
+
-
OPEN/CLOSE
STOP
PLAY
q EJECT
2. Remove the cassette tape.
Automatic tape eject
The built-in VCR will automatically rewind the tape when the tape
has ended. And when the tape is rewinded to its beginning, the
cassette tape will be ejected automatically.
To prevent accidental erasure
Remove the erase prevention tab with a screwdriver.
Erase prevention tab
To record again
Cover the hole with a piece of adhesive tape.
Adhesive tape
Tape speed and maximum recording time
Tape Speed
Video Cassette Tape
T-160 T-120 T-90 T-60 T-30
SP
2-2/3 hours 2 hours 1-1/2 hours 1 hour 30 minutes
(Standard Play)
SLP
8 hours 6 hours 4-1/2 hours 3 hours 1-1/2 hours
(Super Long Play)
2B80201A [E] P27-37 24/2/03, 7:14 PM27