Sanyo DWM-3500 Home Theater System User Manual


 
-E37-
Duplicating a Video Tape
If you connect the VCR to another VCR or camcorder, you can
duplicate a previously recorded tape.
Make all connections before turning on the power.
Connection with second Video recorder
To AUDIO (R) INTo VIDEO IN
To AUDIO (L) IN
To AUDIO (R) OUTTo VIDEO OUT
Playback VCR
Recording VCR (Main unit)
To AUDIO (L) OUT
AUDIO/VIDEO cables
(not supplied)
Connection with Video camera
To AUDIO (R) IN
To AV Jack
To VIDEO IN
To AUDIO (L) IN
AUDIO/VIDEO cables (not supplied)
Recording VCR (Main unit)
Playback Camcorder
For duplicating a previously recorded tape from a camcorder,
follow the camcorder manufacturers instructions. A typical
camcorder dubbing hookup is shown above.
1. Load a blank cassette tape with the erase prevention tab
intact into the recording VCR.
Load a previously recorded tape into the playback VCR or
CAMCORDER.
2. Press [TAPE SPEED] to select the desired tape speed SP or
SLP.
SP or SLP appears on the TV screen.
00 : 00 : 00 SP
It is recommended that you set the Speed to the SP mode
on the recording VCR for best results.
3. Press [INPUT] to select AUDIO/VIDEO input position.
L will appear on the FL display.
4. Press [REC/OTR], then press [k]. (Recording standby mode)
k
REC/OTR
TAPE SPEED
INPUT
5. Press the play button on the playback VCR or CAMCORDER,
then press the pause button. (Playback standby mode)
6. Release the recording pause and the playback still
simultaneously to begin the duplicating process.
Recording a DVD/CD Disc
You can record disc material in DVD, Audio CD, etc. onto a Video
tape with this VCR.
Preparation
Turn ON the TV and select the corresponding video input.
Load a cassette tape with the erase prevention tab intact.
Load a DVD/CD disc.
Press [VCR] to select the VCR mode. (The VCR indicator on
the front panel will light.)
1. Press [TAPE SPEED] to select the desired tape speed SP or
SLP.
SP or SLP appears on the TV screen.
00 : 00 : 00 SP
2. Press [DVD] to select the DVD mode.
3. Press [a] to start playback.
4. Press [REC/OTR] to start recording.
The unit will change to the VCR mode automatically and the
playback picture or sound will be duplicated on the video
cassette tape.
5. Press [n] if you finish recording.
If you wish to stop a main unit disc, press [DVD] to change the
DVD mode, then press [n].
Notes:
You may not be able to record the beginning of the disc.
Begin VCR recording once program playback commences
on the DVD.
You can not record discs encoded with copy guard
function. The following icon will show up on the TV
screen.
2
3
1
4
5
VCR
Need help? Call
1-800-813-3435
2B80201A [E] P27-37 24/2/03, 7:14 PM37