Sanyo DWM-3500 Home Theater System User Manual


 
-E26-
To ADD/DELETE Channels
You can add the channels you want or delete the channels you
do not want manually.
Preparation:
Turn ON the TV and set to the video input mode.
Press [VCR] to select the VCR mode. (The VCR indicator on
the front panel will light.)
1. Repeat the steps 1 ~ 2 in TV/CATV selection on page E25.
Then press [4] or [5] to select ADD/DELETE and press
[ENTER].
4 5
2. Press the number button(s), [4] or [5] to select a channel
number you want to add or delete.
4/5/0
-
9/ENTER/MENU
ADD
CH 003
3. To add channels
Press [ENTER] until ADD appears on the screen to set to
add the unmemorized channel.
To delete channels
Press [ENTER] until DELETE appears on the screen to set
to delete the channel from memory.
The channel number will blink.
4. Repeat steps 2 ~ 3 to add or delete other channel.
5. Press [SETUP/MENU] until the menu screen is cleared.
Noise Elimination
When you dont want to receive a weak signal broadcast, the
Blue back screen can be obtained by selecting the NO NOISE
BACKGROUND ON.
1. Press [SETUP/MENU].
The MENU screen appears on the TV screen.
4/5/ENTER/MENU
MENU
TIMER REC SET
AUTO REPEAT
ON OFF
ON OFF
SAP
CH SETUP
SYSTEM SETUP
SPEAKER SETUP
TVGuardian SETUP
2. Press [4] or [5] to select SYSTEM SETUP, then press
[ENTER].
4/5/ENTER/MENU
MENU
TIMER REC SET
AUTO REPEAT
ON OFF
ON OFF
SAP
CH SETUP
SYSTEM SETUP
SPEAKER SETUP
TVGuardian SETUP
3. Press [4] or [5] to select NO NOISE BACKGROUND.
4/5/ENTER/MENU
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
AUTO CLOCK
STANDARD TIME
DAYLIGHT SAVING TIME
ON OFF
ON OFF
4. Press [ENTER] to select the ON or OFF position.
5. Press [SETUP/MENU] until the menu screen is cleared.
Note:
When shipped from factory, the NO NOISE BACKGROUND
option is set to the ON position.
ENTER
VCR
4,5
SETUP/
MENU
2B80201A [E] P17-26 24/2/03, 7:14 PM26