Filter
Top Products
-E24-
Setting the Video Channel
To view playback of a recorded tape or DVD disc, or to watch a
program selected by the VCR’s channel selector, the TV must be
set to channel 3 or 4 (video channel).
When a TV is connected with the 75 ohm coaxial cable only.
1. Press [POWER] to turn on the unit.
2. Press [VCR] to select the VCR mode.
The VCR indicator on the front panel will light.
3. Set the channel selector switch on the rear panel to 3 CH or 4
CH.
3
CH
4
CH
COMPONENT
VIDEO
AM LOOP
AUDIO
AUDIO OUT
(
6–CHANNEL
)
L
R
IN
VHF/UHF
ANT
( )
OUT
TV
( )
Y
P
B
PR
O
UTPUT
DVD/VCR OUTPUT
FM 75Ω
4. Turn ON the TV and set to channel 3 or 4 to correspond with
the channel selected in step 3.
5. Press [TV/VCR] to select the VCR position.
“VCR” will appear on the FL display.
6. Select any channel to receive a TV station in your area.
The channel number will appear on the screen for
approximately 4 seconds.
For a push-button TV tuner
If channel 3 or 4 corresponding to the video channel cannot be
tuned on your TV, proceed as follows: set the channel selector
switch on the main unit’s rear panel and the TV to 3 CH or 4 CH,
play back a prerecorded tape and tune the TV to receive a sharp
color picture from the video cassette recorder. Refer to your TV
owner’s manual for details.
Setting the Language
You can choose from three different languages (English, Spanish,
and French) for the on-screen displays.
1. Press [SETUP/MENU].
If you use the unit for the first time and press [SETUP/
MENU], instead of the main menu screen below the “SYSTEM
SETUP” menu screen in step 3 may appear.
〈4/5/ENTER/MENU〉
MENU
TIMER REC SET
AUTO REPEAT
ON OFF
ON OFF
SAP
CH SETUP
SYSTEM SETUP
SPEAKER SETUP
TVGuardian SETUP
2. Press [4] or [5] to select “SYSTEM SETUP”, then press
[ENTER].
3. Press [4] or [5] to select “LANGUAGE/IDIOMA/LANGUE”,
then press [ENTER].
〈4/5/ENTER/MENU〉
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
AUTO CLOCK
STANDARD TIME
DAYLIGHT SAVING TIME
ON OFF
ON OFF
4. Press [4] or [5] to select the desired language: English
(ENGLISH), Spanish (ESPAÑOL) or French (FRANCAIS),
then press [ENTER].
〈4/5/ENTER/MENU〉
5. Press [SETUP/MENU] until the menu screen is cleared.
Notes:
• Both the VCR and the DVD have their own menu (see page
E56).
• If no buttons are pressed for more than 60 seconds, the
MENU screen will return to normal TV-operation automatically.
ENTER
4,5
1, 5
5
2
1
2B80201A [E] P17-26 24/2/03, 7:14 PM24