Filter
Top Products
-E33-
One-touch Timer Recording (OTR)
The One-touch Timer Recording feature provides a simple and
convenient way to make a timed recording.
Preparation:
• Turn ON the TV and set to the video input mode.
• Press [VCR] to select the VCR mode. (The VCR indicator on
the front panel will light.)
Example: One-touch Timer Recording for 30 minutes.
1. Load a cassette tape with the erase prevention tab intact.
The unit will automatically turn on.
2. Press [TAPE SPEED] to select the desired tape speed SP or
SLP.
The tape counter and SP or SLP will appear on the TV screen
for approximately 4 seconds.
00 : 00 : 00 SP
3. Set the TV/CATV option to the appropriate position (see
“TV/CATV selection” on page E25).
TV: VHF/UHF channels
CATV: CABLE TV channels
4. Press the number buttons [0–9] or [CH] +/– to select the
channel to be recorded.
5. Press [REC/OTR].
6. Press [REC/OTR] again to stop recording after 30 minutes.
Each additional press of [REC/OTR] will increase recording
time as shown in the chart below, up to a maximum of 5
hours. The OTR and recording time will appear on the TV
screen for approximately 4 seconds. And, REC will keep
blinking on the FL display.
CH 125
INDEX
OTR 0 : 30
Press Recording time Press Recording time
once NORMAL REC 6 times 3:00
twice 0:30 7 times 4:00
3 times 1:00 8 times 5:00
4 times 1:30 9 times NORMAL REC
5 times 2:00
To cancel OTR
Press [n] or turn off the power.
“n” will appear on the TV screen for approximately 4 seconds.
Note:
If you wish to watch the DVD playback during the OTR, press
[DVD] to change to DVD mode and perform the DVD playback
(see page E39).
Need help? Call
1-800-813-3435
5, 6
VCR
4
2
n
(Stop)
DVD
4
2B80201A [E] P27-37 24/2/03, 7:14 PM33