Filter
Top Products
A 8 A 9
Easy Start
Installing the Polar Bike Mount
Use cable ties to secure the bike mount
securely on the rubber pad.
Attach the receiver by securing the wrist
strap.
Installing the Polar Speed Sensor™
The Polar Speed Sensor measures speed
and distance when cycling.
1. Check the front side of the front fork
to find a suitable place for the speed
sensor. The sensor should be attached
less than 1’8"/ 50 cm from the mounted
wrist receiver. The smaller the distance
the better. Choose the right area on
the fork and clean and dry it thoroughly.
Attach the rubber pad over that area.
2. Place the sensor in the position as in
illustration 2. Then adjust the sensor
towards the wheel as much as possible.
3. Pass the cable ties through the sensor
holes and loosely adjust the ties. Do
not tighten fully yet. If the cable ties
are too short for your bicycle, put two
of them together to make them longer.
How to Prepare the Wrist Receiver
1. Since the display is blank when the receiver leaves the
factory, you have to activate the wrist receiver by pressing
the OK button twice, after which the Time of Day display
appears. This is a one-off procedure; once you have turned
on your receiver you can not turn it off anymore.
2. You may start measuring your heart rate right away
using the default settings. However, the following
settings are ones that it would be useful to change as
soon as possible: Time of Day (see section Watch Settings)
and personal user settings (see section User information
settings).
3. For more information on the functions, see section
“Modes and their functions”. You can either manually
enter the settings by pressing the receiver buttons or you
can define your settings using PC Coach Light software,
after which the data should be transferred from your
computer to the wrist receiver.
4. Wear the wrist receiver as you would wear an ordinary
watch. If you go biking, we recommend attaching the
wrist receiver to a Polar Bike Mount™.
60°
Riding direction
max 1´8´´ /
50 cm
1
2
S510 S520 manual USA GBR A.pm6 7/2/02, 12:588-9