Filter
Top Products
E 70 E 71
Uploading Settings from Computer
Your heart rate monitor offers you the option of uploading your settings
with PC Coach Light software version 3.0 or later to the wrist receiver. You
are also able to set a user ID for easier recognition in multi-user situations.
To be able to upload the settings from PC Coach Light software
via Polar Uplink, you need a personal computer with a sound card
(compatible with Sound Blaster™) and dynamic loudspeakers or
earphones.
1. Start the software.
2. Activate the upload function of the software and follow the directions
on screen.
3. If the receiver is in the Time of Day display scroll up or down until
CONNECT is displayed.
4. Place the receiver less than 4"/ 10 cm from the loudspeaker.
Do not move the receiver during the data transfer.
5. The receiver automatically starts to upload the information.
To be able to transfer the recorded training information via SonicLink™
and to analyse it with PC Coach Light software version 3.0 or later, you
need a personal computer with a sound card and microphone. To make
sure that the training information transfer will be successful, check that
there are no interfering sounds near the computer.
1. Start the software.
2. Activate the download function of the software and follow the
directions on screen.
3. If the receiver is in the Time of Day display scroll up or down until
CONNECT is displayed. Make sure that start is displayed.
4. Bring and hold the back cover of the receiver next to the computer’s
microphone. Keep the back cover of the wrist receiver within 2" / 5 cm
of the microphone until the SonicLink sound has ceased.
5. Press the OK button to start the data transfer.
SonicLink and COM appear on the display.
You will hear a chirping sound (SonicLink) while the training
information is transferred to the computer. You can monitor
the transfer percentage from the receiver’s display. Press and
hold the stop button to return to the Time of Day display after
data transfer.
You can interrupt the data transfer to the computer by pressing the stop
button during data transfer. CONNECT is displayed.
S510 S520 manual USA GBR A.pm6 7/2/02, 12:5970-71