Filter
Top Products
The Advanced MCACC menu 10
91
En
Copying MCACC preset data
If you want to manually adjust the Acoustic
Calibration EQ (see Manual MCACC setup on
page 81), we recommend copying your current
settings
1
to an unused MCACC preset. Instead
of just a flat EQ curve, this will give you a
reference point from which to start.
1 Select ‘
MCACC Memory Copy
’ from the
Data Management
setup menu.
2 Select the setting you want to copy.
• All Data – Copies all the settings of the
selected MCACC preset memory.
•
Level & Distance
– Copies only the channel
level and speaker distance settings of the
selected MCACC preset memory.
3 Select the MCACC preset you’ll be
copying the settings ‘
From
’, then specify
where you want to copy them (‘
To
’).
Make sure you don’t overwrite an MCACC
preset you’re currently using (this can’t be
undone).
4 Select ‘
OK
’ to confirm and copy the
settings.
When MCACC Memory Copy? is displayed,
select YES. If NO is selected, the memory is not
copied.
Completed! shows in the GUI screen to
confirm the MCACC preset has been copied,
then you automatically return to the Data
Management setup menu.
Clearing MCACC presets
If you are no longer using one of the MCACC
presets stored in memory, you can choose to
clear the calibration settings of that preset.
1 Select ‘
MCACC Memory Clear
’ from the
Data Management
setup menu.
2 Select the MCACC preset you want to
clear.
Make sure you don’t clear an MCACC preset
you’re currently using (this can’t be undone).
3 Select ‘
OK
’ to confirm and clear the
preset.
When MCACC Memory Clear? is displayed,
select YES. If NO is selected, the memory is not
cleared.
Completed! shows in the GUI screen to
confirm the MCACC preset has been cleared,
then you automatically return to the Data
Management setup menu.
Note
1 The settings made in Automatically setting up for surround sound (Auto MCACC) on page 37 or Automatic MCACC
(Expert) on page 77.
a. Memory Rename
b. MCACC Memory Copy
c. MCACC Memory Clear
3.Data Management
A/V RECEIVER
Exit Return
Copy : All Data
From : M1.MEMORY 1
3b.MCACC Memory Copy
To : M1.MEMORY 1
OK
A/V RECEIVER
Exit Cancel
a. Memory Rename
b. MCACC Memory Copy
c. MCACC Memory Clear
3.Data Management
A/V RECEIVER
Exit Return
Clear : M1.MEMORY 1
3c.MCACC Memory Clear
OK
A/V RECEIVER
Exit Cancel
VSX-1019_DF.book 91 ページ ２００９年３月１３日 金曜日 午前９時５８分