Filter
Top Products
KURO LINK07
62
En
Before using synchronization
Once you have finished all connections and
settings, you must:
1 Put all components into standby mode.
2 Turn the power on for all components,
with the power for the flat screen TV being
turned on last.
3 Choose the HDMI input to which the TV is
connected to this receiver, and see if video
output from connected components displays
properly on the screen or not.
4 Check whether the components
connected to all HDMI inputs are properly
displayed.
Synchronized amp mode
The synchronized amp mode can be set from
the KURO LINK-compatible TV’s remote
control. See the explanation below for
operations in the synchronized amp mode.
These functions are set from the TV’s menu
screen. For more information, refer to the
operating instructions of the KURO LINK-
compatible TV.
Synchronized amp mode operations
When using the synchronized amp mode, the
KURO LINK-compatible component
connected to the receiver operates in sync as
described below.
•The receiver’s volume can be set and the
sound can be muted using the TV’s remote
control.
•When the TV’s power is set to standby, the
receiver’s power is also set to standby.
(Only when the input for a component
connected to the receiver by HDMI
connection is selected or when watching
the TV.)
•The receiver’s input switches automatically
when the KURO LINK-compatible
component is played.
•The receiver’s input switches automatically
when the TV’s channel is switched.
• The synchronized amp mode remains in
effect even if the receiver’s input is
switched to a component other than one
c
o
nnected by HDMI.
The operations below can also be used on
Pioneer KURO LINK-compatible flat screen
TVs.
•When the receiver’s volume is adjusted or
the sound is muted, the volume status is
displayed on the flat screen TV’s screen.
• When the OSD language is switched on
the flat screen TV, the receiver’s language
setting also switches accordingly.
Canceling synchronized amp mode
• When the synchronized amp mode is
canceled, the receiver’s power turns off if
you were viewing an HDMI input or a TV
program on the TV.
• When in the synchronized amp mode, the
synchronized amp mode is canceled when
the receiver’s power is turned off. To turn
the synchronized amp mode back on,
select the synchronized amp mode using
the TV’s remote control.
• When in the synchronized amp mode, the
synchronized amp mode is canceled if an
operation that produces sound from the TV
is performed from the TV’s menu screen,
etc.
VSX-1019_DF.book 62 ページ ２００９年３月１３日 金曜日 午前９時５８分