Filter
Top Products
6
En
Flow of settings on the receiver
The unit is a full-fledged AV receiver equipped
with an abundance of functions and terminals.
It can be used easily after following the
procedure below to make the connections and
settings.
The colors of the steps indicate the following:
Required setting item
Setting to be made as necessary
1 Before you start
• Checking what’s in the box (page 7)
•Loading the batteries (page 7)
2
Determining the speakers’ application
(page 15)
• 7.1ch surround connection
•5.1ch surround & Front Bi-amping connection
• 5.1ch surround & ZONE 2 connection
• 5.1ch surround & Speaker B connection
3 Connecting the speakers
• Placing the speakers (page 17)
• Connecting the speakers (page 18)
•Standard 5.1/6.1/7.1-channel surround
connections (page 19)
•Bi-amping your speakers (page 20)
4 Connecting the components
• About the audio connection (page 22)
• About the video converter (page 22)
• Connecting your TV and playback
components (page 23)
• Connecting AM/FM antennas (page 30)
• Plugging in the receiver (page 35)
5
Switching the speaker impedance
(page 36)
(Only if the impedance of the connected
speakers is 6 Ω to 8 Ω)
6Power On
7 Making the initial settings according to the
region and environment in which you live
•Changing the TV format setting (page 36)
• Changing the frequency step (page 36)
• Changing the OSD display language (OSD
Language) (page 36)
8 Surround back speaker setting (page 93)
9
MCACC speaker settings
• Automatically setting up for surround sound
(Auto MCACC) (page 37)
10
The Input Setup menu (page 40)
(When using connections other than the
recommended connections)
11
Basic playback (page 42)
12
Adjusting the sound and picture
quality as desired
•Using the various listening modes
• Using surround back channel processing
(page 55)
• Better sound using Phase Control (page 58)
•Measure the all EQ type (SYMMETRY/ALL CH
ADJ/FRONT ALIGN) (page 77)
• Change the channel level while listening (Tip
on page 96)
• Switches on/off the Acoustic Calibration EQ,
Sound retriever or Dialog Enhancement
(page 63)
• Setting the PQLS function (page 61)
•Setting the Audio options (Tone, Loudness or
Sound delay, etc.) (page 63)
• Setting the Video options (page 66)
13 Other optional adjustments and
settings
•KURO LINK Setup (page 61)
• The Advanced MCACC menu (p age 76)
• The system and the other setup (page 92)
14
Making maximum use of the remote
control
•Operating multiple receivers (page 72)
• Setting the remote to control other
components (page 72)
VSX-1019_DF.book 6 ページ ２００９年３月１３日 金曜日 午前９時５８分