Filter
Top Products
KURO LINK 07
61
En
KURO LINK Setup
You must adjust the settings of this receiver as
well as KURO LINK-compatible connected
components in order to make use of the KURO
LINK function. For more information see the
operating instructions for each component.
1 Press , then press
Home Menu
.
2 Select ‘
System Setup
’, then press
ENTER
.
3 Select ‘
Other Setup
’, then press
ENTER
.
4 Select the ‘
KURO LINK
’ setting you want.
Choose whether to set this unit’s KURO LINK
function ON or OFF. You will need to set it to
ON to use the KURO LINK function.
When using a component that does not
support the KURO LINK function, set this to
OFF.
• ON – Enables the KURO LINK function.
When this unit’s power is turned off and
you have a supported source begin
playback while using the KURO LINK
function, the audio and video output from
the HDMI connection are output from the
flat screen TV.
• OFF – The KURO LINK is disabled.
Synchronized operations cannot be used.
When this unit’s power is turned off, audio
and video of sources connected via HDMI
are not output.
5 Select the ‘
Display Power Off
’ setting
you want.
If the TV’s power is turned off while using the
KURO LINK function, the r eceiver ’s power is
also turned off (all power off function). This
function can be disabled.
• YES – The all power off function is enabled.
The receiver’s power turns off together with
the TV’s power.
This function only works when the input for
a component connected to the receiver by
HDMI connection is selected or when
watching the TV.
• NO – The all power off function is disabled.
The receiver’s power is not affected when
the TV’s power is turned off.
6 When you’re finished, press HOME MENU.
You will finish to HOME MENU.
Setting the PQLS function
PQLS (Precision Quartz Lock System) is a
digital audio signal transfer control technology
using the KURO LINK function. It offer s higher-
quality audio playback by controlling audio
signals from the receiver to a PQLS compatible
player, etc. This enables removing jitter that
has a negative effect on the quality of the
sound and is generated upon transmission.
This function is activated when KURO LINK is
set to ON.
• Press , then press
PQLS
to
select PQLS setting.
The setting is displayed on the front panel
display.
• PQLS
AUTO – PQLS is enabled. A
precision quartz controller in this receiver
eliminates distortion caused by timing
errors (jitter), giving you the best possible
digital-to-analog conversion from audio CD
sources when you use the HDMI interface.
This is valid as an HDMI function for PQLS-
compatible players.
• PQLS
OFF – PQLS is disabled.
RECEIVER
2. Multi Ch In Setup
3. ZONE Audio Setup
4. Power ON Level Setup
5. Volume Limit Setup
6.
Remote Control Mode Setup
7.
Flicker Reduction Setup
1. KURO LINK Setup
4d.Other Setup
A/V RECEIVER
Exit Return
4d1.KURO LINK Setup
A/V RECEIVER
Exit Finish
KURO LINK : ON
Display Power Off : YES
RECEIVER
VSX-1019_DF.book 61 ページ ２００９年３月１３日 金曜日 午前９時５８分