Filter
Top Products
The system and the other setup 11
99
En
• Remote Control Mode Setup – Sets this
receiver’s remote control mode (page 101).
• Flicker Reduction – Adjusts the way the
GUI screen looks (page 101).
5 Make the adjustments necessary for each
setting, pressing
RETURN
to confirm after
each screen.
Multi Channel Input Setup
You can adjust the level of the subwoofer for a
multi-channel input. Also, when the multi-
channel input is selected as an input function,
you can display the video images of other input
functions. In the Multi Channel Input Setup,
you can assign a video input to the multi-
channel input.
1 Select ‘
Multi Ch In Setup
’ from the
Other
Setup
menu.
2 Select the ‘
SW Input Gain
’ setting you
want.
• 0dB – Outputs sound of the subwoofer at
the level originally recorded on the source.
• +10dB – Outputs sound of the subwoofer
at the level increased by 10 dB.
3 Select the ‘
Video Input
’ setting you want.
When the multi-channel input is selected as an
input function, you can display the video
images of other input functions. The video
input can be selected from the following: DVD,
TV/SAT, DVR, VIDEO, OFF.
4 When you’re finished, press
RETURN
.
You will return to the Other Setup menu.
ZONE Audio Setup
If you’ve made MULTI-ZONE connections (see
Using the MULTI-ZONE controls on page 69),
you may need to specify your volume setting.
1 Select ‘
ZONE Audio Setup
’ from the
Other Setup
menu.
2 Select the volume level setting of ZONE 2.
1
• Variable – Use this setting if you’ve
connected a power amplifier in the sub
room (this receiver is simply being used as
a pre-amp) and you will be using this
receiver’s controls to adjust the volume.
4d.Other Setup
A/V RECEIVER
Exit Return
3. ZONE Audio Setup
4. Power ON Level Setup
5. Volume Limit Setup
6.
Remote Control Mode Setup
7.
Flicker Reduction Setup
2. Multi Ch In Setup
1. KURO LINK Setup
4d2.Multi Ch In Setup
A/V RECEIVER
Exit Finish
SW Input Gain : 0dB
Video Input : DVD
Note
1 If you selected ZONE 2 in the Surround back speaker setting on page 94, you won’t be able to change the volume level.
4d2.Multi Ch In Setup
A/V RECEIVER
Exit Finish
SW Input Gain : +10dB
Video Input : DVD
2. Multi Ch In Setup
3. ZONE Audio Setup
4. Power ON Level Setup
5. Volume Limit Setup
6.
Remote Control Mode Setup
7.
Flicker Reduction Setup
1. KURO LINK Setup
4d.Other Setup
A/V RECEIVER
Exit Return
4d3.ZONE Audio Setup
A/V RECEIVER
Exit Finish
ZONE 2 Volume Level : Variable
VSX-1019_KU.book Page 99 Thursday, January 8, 2009 12:01 PM