Pioneer VSX-919AH-K Stereo Receiver User Manual


 
Basic Setup04
36
En
Chapter 4:
Basic Setup
Switching the speaker impedance
We recommend using speakers of 8 with this
system, but it is possible to switch the
impedance setting if you plan to use speakers
with a 6 impedance rating.
1 Switch the receiver into standby.
2 While holding down
ENTER
on the front
panel, press
STANDBY/ON
.
The display shows RESET NO .
Use TUNE +/– (or / on the remote control)
to select SPEAKER 8, and then use
PRESET +/– (or / on the remote control) to
select SPEAKER 8 or SPEAKER 6.
SPEAKER 8 – Use this setting if your
speakers are rated at 8 or more.
SPEAKER 6 – Use this setting if your
speakers are rated at 6 .
Changing the OSD display
language (OSD Language)
The language used on the on-screen display
can be changed.
The explanations in these operating
instructions are for when English is
selected for the OSD.
1 Press on the remote control,
then press
HOME MENU
.
A Graphical User Interface (GUI) screen
appears on your TV. Use /// and
ENTER to navigate through the screens and
select menu items. Press RETURN to exit the
current menu.
2Select
System Setup
’ from the
HOME
MENU
.
3Select
OSD Language
’ from the
System
Setup
menu.
4 Select the desired language.
English
French
German
Italian
Spanish
Dutch
Russian
5Select
OK
’ to change the language.
The setting is completed and the
System Setup
menu reappears automatically.
RECEIVER
A/V RECEIVER
Exit Return
a.Manual SP Setup
b. Input Setup
c. OSD Language
d. Other Setup
4.SystemSetup
4c.OSD Language
A/V RECEIVER
Exit Return
Language
: English
OK
4c.OSD Language
A/V RECEIVER
Exit Return
Language
: English
OK
VSX-1019_KU.book Page 36 Thursday, January 8, 2009 12:01 PM