Filter
Top Products
The system and the other setup 11
93
En
Chapter 11:
The system and the other setup
Making receiver settings from
the System Setup menu
The following section describes how to change
the speaker-related settings manually and
make various other settings (input selection,
OSD language selection, etc.).
1 Switch on the receiver and your TV.
Use the RECEIVER button to switch on.
1
• If headphones are connected to the
receiver, disconnect them.
2 Press , then press HOME
MENU.
2
A Graphical User Interface (GUI) screen
appears on your TV. Use /// and
ENTER to navigate through the screens and
select menu items. Press RETURN to confirm
and exit the current menu.
• Press HOME MENU at any time to exit the
HOME MENU.
3 Select ‘
System Setup
’ from the
HOME
MENU
, then press
ENTER
.
4 Select the setting you want to adjust.
•
Manual SP Setup
– Sets the type of
connection used for surround back
terminals and the size, number distance
and overall balance of the connected
speakers (see
Manual speaker setup
on
page 94).
• Input Setup – Specifies what you’ve
connected to the digital, HDMI and
component video inputs (see The Input
Setup menu on page 39).
• OSD Language – The GUI screen’s display
language can be changed (see Changing
the OSD display language (OSD Language)
on page 36).
• Other Setup – Makes customized settings
to reflect how you are using the receiver
(see The Other Setup menu on page 98).
Note
1 Make sure not to switch off the power when using the System Setup menu.
2 You can’t use the HOME MENU when either the iPod/USB or SIRIUS Radio input function is selected or the
headphones are connected. When you set ZONE 2 to ON (page 69), you can’t use the HOME MENU.
RECEIVER
1. Advanced MCACC
2. MCACC Data Check
3. Data Management
4. System Setup
Exit Return
HOME MENU
A/V RECEIVER
A/V RECEIVER
Exit Return
a.Manual SP Setup
b. Input Setup
c. OSD Language
d. Other Setup
4.System Setup
VSX-1019_KU.book Page 93 Thursday, January 8, 2009 12:01 PM