Filter
Top Products
Controls and displays02
12
En
Press TUNER first to access:
D.ACCESS – After pressing, you can
access a radio station directly using the
number buttons (page 51).
CLASS – Switches between the seven
banks (classes) of radio station presets
(page 52).
4
TV CONTROL
buttons
These buttons are dedicated to control the TV
assigned to TV operation selector switch. Thus
if you only have one TV to hook up to this
system assign it to the TV operation selector
switch (see page 75 for more on this).
– Use to turn on/off the power of the TV.
INPUT – Use to select the TV input signal.
CH +/– – Use to select channels.
VOL +/– – Use to adjust the volume on your
TV.
5 Tuner/component control buttons/
HOME
MENU
These button controls can be accessed after
you have selected the corresponding input
function button (DVD, DVR, TV, etc.). The
BAND and T.EDIT tuner controls are explained
on page 51 and page 52.
Press first to access:
AUDIO PARAMETER – Use to access the
Audio options (page 64).
VIDEO PARAMETER – Use to access the
Video options (page 67).
HOME MENU – Use to access the Home
Menu (pages 36, 39, 62, 77, 93 and 98).
RETURN – Press to confirm and exit the
current menu screen (also use to return to
the previous menu with DVDs or to select
closed captioning with DTV).
6
///
(
TUNE
/
PRESET
) /
ENTER
Use the arrow buttons when setting up your
surround sound system (see page 77) and the
Audio or Video options (page 64 or 67). Also
used to control DVD menus/options and for
deck 1 of a double cassette deck player. Use
TUNE/ to find radio frequencies and use
PRESET / to find preset stations (page 52).
7 Receiver controls
Press first to access:
AUTO/ALC/DIRECT –
Switches between
Auto Surround
(page 53)
, Auto level control
mode and Stream Direct mode
(page 56).
STEREO – Switches between stereo
playback, and Front Stage Surround
Advance modes (page 55).
STANDARD – Press for Standard decoding
and to switch between the various 2 Pro
Logic IIx and Neo:6 options (page 53).
ADV SURR – Use to switch between the
various surround modes (page 54).
8 Component control buttons
The main buttons (, , etc.) are used to
control a component after you have selected it
using the input function buttons.
The controls above these buttons can be
accessed after you have selected the
corresponding input function button (for
example DVD, DVR or TV). These buttons also
function as described below.
Press TV first to access:
ANT – Use to select the VHF/UHF antennas
or Cable TV.
Press TUNER first to access:
MPX – Switches between stereo and mono
reception of FM broadcasts. If the signal is
weak, then switching to mono will improve
the sound quality (page 51).
RECEIVER
RECEIVER
VSX-1019_KU.book Page 12 Thursday, January 8, 2009 12:01 PM