Pioneer SC-37 Stereo Receiver User Manual


 
Controlling the rest of your system (In case of SC-37)
10
87
En
remote control to set up and listen to a CD on the
receiver, and then use the remote control to rewind a
tape in your VCR while you continue to listen to your CD
player.
When direct function is on, any component you select
(using the input function buttons) will be selected by both
the receiver and the remote control. When you turn direct
function off, you can operate the remote control without
affecting the receiver.
1 While pressing MULTI OPERATION, press HOME
MENU.
The remote display shows SETUP MENU.
2Use
/
to select ‘DIRECT FUNC’, then press ENTER.
The remote display prompts you for the button of the
input function you want to control.
3 Press the input function button for the component
you want to control, then press
ENTER
.
1
4Use
/
to switch direct function
ON
or
OFF
, then
press
ENTER
.
The remote display shows OK to confirm the setting.
Multi Operation and System Off
The Multi Operation feature allows you to program a
series of up to 6 commands for the components in your
system. For example, you could turn on your TV, turn on
your DVD player and start playing the loaded DVD using
only two buttons on the remote control.
Similar to multi operations, System Off allows you to use
one button to stop and switch off a series of components
in your system at the same time.
2
Programming a multi-operation or a
shutdown sequence
Set the remote control operation mode selector switch to
RECEIVER when you want to program this receiver’s
operations, to SOURCE when you want to program
operations of other components.
1 While pressing
MULTI OPERATION
, press
HOME
MENU
.
The remote display shows SETUP MENU.
2Use
/
to select ‘
MULTI OPERATE
’ or ‘
SYSTEM
OFF
’ from the menu and press
ENTER
.
If you selected Multi Operation (MULTI OPERATE), the
remote display prompts you for an input function button.
If you selected System Off (SYSTEM OFF), go to step 4.
3 Press the input function button for the component
that will start the multi-operation, then press
ENTER
.
For example, if you want to start the sequence by
switching on your DVD player, press DVD.
4Use
/
to select ‘
EDIT CODE
’, then press
ENTER
.
To erase any previously stored multi-operations (or
shutdown sequences) select CLEAR CODE above.
5Use
/
to select a command in the sequence, then
press
ENTER
.
If this is the first command in the sequence, select 1st
CODE. Otherwise, simply choose the next command in
the sequence. PRESS KEY flashes after you press ENTER.
6 If necessary, press the input function button for the
component whose command you want to input.
This is only necessary if the command is for a new
component (input function).
7 Select the button for the command you want to
input.
The following remote control commands can be selected:
You don’t need to program the receiver to switch on
or off. This is done automatically.
With Pioneer components, you don’t need to:
program the power to switch off in a shutdown
sequence (except DVD recorders);
These take priority in multi operations (not shutdown).
Note
1 You can’t use direct function TUNER, HMG NET RADIIO, ADAPTER and iPod USB.
2• Before Multi Operation and System Off will work correctly, you must setup the remote to work with your TV and other components (see
Setting the remote to control other components on page 84 for more on this).
• Some units may take some time to power up, in which case multiple operations may not be possible.
• Power on and off commands only work with components that have a standby mode.
• Up to 5 commands can be programmed for System Off.
DVD
RECEIVER SOURCE
MAIN
MULTI
OPERATION
AUDIO
PARAMETER
VIDEO
PARAMETER
ZONE2
SOURCE
TV
RECEIVER
3
iPod
USB
OPTION
MULTI CH
ADAPTER
NET RADIO
INPUT SELECT LIGHT
CD
PHONO
AUX
INPUT MUTE MUTE
VOL
VOL
TV CONTROL
CH
VIDEO
CD-R
IN
TUNER
HMG
BD
TV
HDMIDVR
BDR
12
AUDIO
PARAMETER
TOP MENU
BAND
iPod CTRL PTY SEARCH
CATEGORY
LIST
TOOLS
HOME
MENU
STATUS
THX PQLSMPX MEMORY
PHASE CTRL CH LEVEL
T.EDIT
GUIDE
VIDEO
PARAMETER
INPUT MUTE
TUNE
TUNE
PRESET PRESET
MUTE
PGM MENU
TV CONTROL
STEREO
SIGNAL SEL SLEEP AUDIO
INFO
DIMMER
A.ATT
CLR
SBch MCACC
HDMI OUT
D.ACCESS
ENTER
CLASS
DISP
CH
AUTO/ALC/
DIRECT
STANDARD ADV SURR
ENTER
RETURN
SC-37_35_UXJCB.book 87 ページ 2010年3月9日 火曜日 午前9時32分