Filter
Top Products
Other connections
09
69
En
3Use the
INPUT SELECTOR
dial to select the source
for the zone you have selected.
For example, ZONE 2 CD-R sends the source connected
to the CD-R inputs to the primary (ZONE 2) sub room.
•If you select TUNER, you can use the TUNER controls
to select a preset station (see Saving station presets
on page 42 if you’re unsure how to do this).
1
• It is not possible to use the multi-zone function to play
different inputs from among Home Media Gallery,
XM and SIRIUS Radio in different zones. (It is
possible to play the same input in different zones.)
4Use the
MASTER VOLUME
dial to adjust the
volume.
This is only possible if you selected the VARIABLE
volume control in ZONE Audio Setup on page 95.
2
5 When you’re finished, press
CONTROL
again to
return to the main zone controls.
You can also press MULTI-ZONE & SOURCE ON/OFF on
the front panel to switch off all output to the sub zone(s).
3
MULTI-ZONE remote controls
Set the MULTI-ZONE operation switch to ZONE 2 or
ZONE 3 to operate the corresponding zone.
The following table shows the possible MULTI-ZONE
remote controls:
Connecting an IR receiver
If you keep your stereo components in a closed cabinet or
shelving unit, or you wish to use the sub zone remote
control in another zone, you can use an optional IR
receiver (such as a Niles or Xantech unit) to control your
system instead of the remote sensor on the front panel of
this receiver.
4
1 Connect the IR receiver sensor to the
MULTI-ZONE
& SOURCE IR IN
(
MAIN
) jack on the rear of this
receiver.
If you also plan to use a separate IR receiver in the sub
room, connect this to the IR IN (ZONE 2) jack.
2 Connect the
IR IN
jack of another component to the
MULTI-ZONE & SOURCE IR IN
IR OUT
jack on the rear
of this receiver to link it to the IR receiver.
Please see the manual supplied with your IR receiver for
the type of cable necessary for the connection.
• If you want to link a Pioneer component to the IR
receiver, see Operating other Pioneer components
with this unit’s sensor on page 108 to connect to the
CONTROL jacks instead of the IR OUT jack.
Note
1 The tuner cannot be tuned to more than one station at a time. Therefore, changing the station in one zone also changes the station in the other
zone. Please be careful not to change stations when recording a radio broadcast.
2 The volume levels of the main and sub zones are independent.
3 • You won’t be able to switch the main zone off completely unless you’ve switched off the MULTI-ZONE control first.
• If you don’t plan to use the MULTI-ZONE feature for awhile, turn off the power in both the sub and main rooms so that this receiver is in
standby.
Button What it does
Switches on/off power in the currently selected
sub zone.
INPUT
SELECT
Use to select the input source in the currently
selected sub zone.
Input
source
buttons
Use to select the input source directly (this may
not work for some functions) in the currently
selected sub zone.
VOL +/– Use to set the listening volume in the currently
selected sub zone.
4 • Remote operation may not be possible if direct light from a strong fluorescent lamp is shining on the IR receiver remote sensor window.
• Note that other manufacturers may not use the IR terminology. Refer to the manual that came with your component to check for IR
compatibility.
• If using two remote controls (at the same time), the IR receiver’s remote sensor takes priority over the remote sensor on the front panel.
LAN
(10/100)
DIGITAL
CAUTION:
SPEAKER IMPEDANCE 6Ω
-
ATTENTION:
ENCEINTE D'IMPEDANCE
D
OPTICAL
RS-232C
HDMI
COAXIAL
XM
IR
CONTROL
SIRIUS
BD
IN
IN
IN
12 V
TRIGGER
IN
1
IN
2
IN
3
OUT
1
OUT
2
SOURCE
OUT
ZONE3/
SOURCE
OUT
31
ASSIGNABLE
-
(HDMI
CTRL)
ASSIGNABLE
ASSIGNABLE
(CD-R)
IN
4
(VIDEO1)
IN
3
(DVR1)
IN
2
(TV/SAT)
IN
1
IN
3 (DVR2)
IN
2 (CD)
IN
1
(DVD)
IN
1 I
N
(OUTPUT
12V
TOTAL
50mA
MAX)
1
2
IN
1
IN
IN
2
OUT
OUT
(DVD)
P
R
P
B
YP
R
(VIDEO1)
R
ZONE 2 OUT
PHONO
IN
CD
IN
OUT
CD-
R
SIGNAL
GND
ZONE 2
OUT
ZONE 3
OUT
L
L
R
SEE INSTRUCTION
MANUAL
SELECTABLE
VOIR LE MODE
D'EMPLOI
SELECTABLE
IR
CONTROL
IN
1
OUT
OUT
IN
IR
IN OUT
CONTROL
IR
CONTROL
IN
1
IN
IN
2
OUT
OUT
SIGNAL
GND
L
R
IR receiver
Closet or shelving unit
Non-Pioneer
component
Pioneer
component
SC07-05.book Page 69 Friday, April 25, 2008 11:59 AM