Panasonic PT-DX800U Home Theater System User Manual


 
Technical Information
98 - ENGLISH
Appendix
Serial terminal
The <SERIAL IN>/<SERIAL OUT> terminals on the side of the projector conform with RS-232C so that the
projector can be connected to and controlled from a computer.
Connection
Single projector Multiple projectors
<Connecting terminals on
projector 1>
<Connecting terminals on
projector 2>
D-Sub 9-pin
(female)
D-Sub 9-pin
(male)
D-Sub 9-pin
(female)
D-Sub 9-pin
(male)
<Connecting terminals on projector>
Computer Computer
D-Sub 9-pin (female)
D-Sub 9-pin
(male)
D-Sub 9-pin
(female)
D-Sub 9-pin
(male)
D-Sub 9-pin (male)
Communication cable Communication cable Communication cable
Pin assignments and signal names
D-Sub 9-pin (female)
Outside view
Pin No. Signal name Details
(1) (5)
(6) (9)
(1) NC
(2) TXD Transmitted data
(3) RXD Received data
(4) Connected internally
(5) GND Earth
(6) NC
(7) CTS
Connected internally
(8) RTS
(9) NC
D-Sub 9-pin (male)
Outside view
Pin No. Signal name Details
(6)(9)
(1)(5)
(1) NC
(2) RXD Received data
(3) TXD Transmitted data
(4) NC
(5) GND Earth
(6) NC
(7) RTS
Connected internally
(8) CTS
(9) NC
Communication conditions (Factory default settings)
Signal level RS-232C-compliant
Sync. method Asynchronous
Baud rate 9 600 bps
Parity None
Character length 8 bits
Stop bit 1 bit
X parameter None
S parameter None