Panasonic PT-DX800U Home Theater System User Manual


 
[SIGNAL LIST] menu
ENGLISH - 69
Settings
Managing the sub memory list
The projector has a sub memory function that can
register the multiple image adjustment data, even if it
is recognized as the same signal by the frequency or
format of the synchronization signal source.
Use this function when you need to adjust the picture
quality such as switching of the aspect ratio or white
balance by the same synchronization signal source.
The sub memory includes all the data that can be
adjusted for each signal, such as the screen aspect
ratio and data adjusted in the [PICTURE] item
([CONTRAST], [BRIGHTNESS], etc.).
Registering the current settings
to the list
1) Press ◀▶ on the normal screen (when
the menu is not displayed).
z
The sub memory registration conrmation
screen is displayed if the sub memory is not
registered. Go to Step 3).
z
A list of sub memories registered to the signal
currently input is displayed.
z
By selecting [SUB MEMORY] in the
[PROJECTOR SETUP] menu
[FUNCTION
BUTTON], the <FUNCTION> button can be
used instead of .
2) Press
▲▼
◀▶ to select the sub
memory number to register in [SUB
MEMORY LIST].
3) Press the <ENTER> button.
z
The [RENAME] screen is displayed.
4) Press
▲▼
◀▶ to select [OK] and
press the <ENTER> button.
z
To rename the registered data, follow the
procedure in Steps 4) and 5) in
Renaming the
registered data
(
page 68).
Switching to the sub memory list
1) Press ◀▶ on the normal screen (when
the menu is not displayed).
z
A list of sub memories registered to the signal
currently input is displayed.
2) Press
▲▼
◀▶ to select the signal to
switch in [SUB MEMORY LIST].
3) Press the <ENTER> button.
z
It will switch to the signal selected in Step 2).
Deleting the sub memory data
1) Press ◀▶ on the normal screen (when
the menu is not displayed).
z
The [SUB MEMORY LIST] screen is displayed.
2) Press
▲▼
◀▶ to select the sub
memory number to delete and press
the <DEFAULT> button.
z
The [ENTRY SIGNAL CLEAR] screen is
displayed.
z
To cancel the deletion, press the <MENU>
button to return to the [REGISTERED SIGNAL
LIST] screen.
3) Press the <ENTER> button.
z
The selected sub memory is deleted.