Filter
Top Products
[NETWORK] menu
ENGLISH - 83
Settings
■ [E-mail set up] page (continued)
(1)
(2)
(3)
(1) [E-MAIL ADDRESS 2]
Enter the E-mail address to be sent when two E-mail
addresses are to be used.
Leave it blank when two E-mail addresses are not to
be used.
(2) Settings of the conditions to send E-mail
Select the conditions to send E-mail to the second
E-mail address.
[MAIL CONTENTS]:
Select either [NORMAL] or [SIMPLE].
[ERROR]:
An E-mail message is sent when an error
occurred in the self-diagn
osis.
[
LAMP1 RUNTIME]:
An E-mail message is sent when the remaining
lamp on time for the lamp 1 has reached the
value set at the right eld.
[LAMP2 RUNTIME]:
An E-mail message is sent when the remaining
lamp on time for the lamp 2 has reached the
value set at the right eld.
[INTAKE AIR TEMPERATURE]:
An E-mail message is sent when the air intake
temperature has reached the value set at the
above
eld.
[
PERIODIC REPORT]:
Place a check mark on this when E-mail is to be
sent periodically to the second E-mail address. It
will be sent on the days and time with the check
mark.
(3) [Submit]
Update the settings.